PP SCREWED END BALL VALVE
We are offering a quality range of PP Screwed End Ball Valve. They are developed under the supervision of our professionals using high-grade polypropylene in compliance with the industry standards. Our range of PP screwed end ball valve is known for stress tolerance, surface hardness and corrosion resistance. We offer these valves in varied sizes and specifications and can also customize as per the specific requirement of the clients.
PP Screwed End Ball Valve
| TECHNICAL SPECIFICATION | |
| Material Of Construction | PP (Polypropylene), PVDF (Polyvinylidene fluoride) |
| Design | 3 piece design |
| Maximum working temp | 80 c (consistently) |
| Connection End | Screw end (BSP thread) |
| Construction | 3 piece design, 1 piece stem (spindle), full bore, Teflon seated |
| Hydraulic Test Pressure | Body-150 PSI & SEAT-100 PSI |
| Size Range | ½”- 15MM TO 100MM- 4” |
| Standard | As per manufactuer’s |
PP Balck Screwed End Ball Valve
| MATERIAL SPECIFICATION | |||
| No. | DESCRIPTION | QTY. | MATERIAL |
| 1) | Side Piece /Flanged end | 2 | Polypropylene |
| 2) | Body | 1 | Polypropylene |
| 3) | Ball | 1 | Polypropylene |
| 4) | Stem/Spindal | 1 | PP With M.S. /S.S |
| 5) | Seat Ring | 2 | PTFE (TEFLON) |
| 6) | Body”O”Ring | 2 | Noeprene |
| 7) | Stem Seal Ring | 1 | PTFE (TEFLON) |
| 8) | Stem “O” Ring | 1 | Neoprene |
| 9) | Stud, Nut & Washer | REQ | M.S. Zinc Plated/S.S |
| 10) | Nut Cap | REQ | Polypropylene. |
| 11) | Handle | 1 | M.S. PP Coated. |
| 12) | Handle Hex. Pin | 1 | M.S./ S.S. |
| 13) | Handle Cap | 1 | Polypropylene. |
| SIZE SPECIFICATION | ALL DIMENSIONS ARE IN ± 2 MM | ||||||
| Size | L | OD | ID | H1 | |||
| In. | mm | ||||||
| 1/2″ | 15 mm | 115 | 30 | 13.5 | 130 | ||
| 3/4″ | 20 mm | 126 | 35 | 19 | 131 | ||
| 1″ | 25 mm | 123 | 45 | 24.5 | 165 | ||
| 1 1/2″ | 40 mm | 154 | 65 | 38 | 197 | ||
| 2″ | 50 mm | 178 | 76 | 50 | 200 | ||
| 2 1/2″ | 65 mm | 206 | 94 | 63.5 | 255 | ||
| 3″ | 80 mm | 222 | 107 | 75 | 255 | ||
| 4″ | 100 mm | 273 | 134 | 100 | 350 | ||
